RedMax BCZ230TS — Product Specification
-
Type: Straight-shaft brushcutter/trimmer with loop handle
Use: Commercial heavy-duty trimming in dense grass, weeds, and light brush under extreme conditions
Key positioning: Lightweight pro trimmer (10.1 lbs) with high torque, Strato-Charged engine, and solid steel shaft for efficiency and durability
-
Type: 2-stroke Strato-Charged®
Displacement: 22.5 cc (1.37 cu in)
Output shaft power: 0.94 hp
Spark plug: NGK BPMR8Y (0.03 in gap)
Fuel tank: 21.64 fl oz
Idling speed: 3,000 rpm
-
Max torque: 1 Nm at 6,500 rpm
Max output shaft rpm: 8,208 rpm
Clutch engagement: 4,000 rpm (±120)
Fuel consumption: 450 g/kWh
High power-to-weight ratio for tough jobs with excellent fuel efficiency
-
Solid steel drive shaft for durability
Drive gear angle: 60°
Gear ratio optimized for torque (TS = torque shaft/high-torque variant)
Lightweight molded frame with loop handle
-
Loop handle for maneuverability
Throttle trigger with cable and stop switch
Strato-Charged tech for lower emissions, higher torque, 20% better fuel economy
Anti-vibration system for comfort
-
Included: Trimmer head (bump-feed), guard
Available separately: Blades, additional heads, harness, trimmer line
Supports conversion to brushcutter blades
-
Exhaust emissions (CO avg CARB): 495.18 g/kWh
EPA/CARB compliant for professional handheld
Includes cutting guards, throttle lockout, and vibration dampening
Operator warnings in manual
-
Daily: Check fuel/line, inspect guards/shaft
Every 10 hours: Clean air filter/cooling fins
Every 50 hours: Replace fuel filter/spark plug, clean exhaust/arrestor
Annual: Gearbox grease, full service; 50:1 mix recommended
-
Dry weight excl. cutting equipment: 10.14 lbs (4.6 kg)
Overall length: ~70-72 in assembled (standard straight-shaft)
Compact and balanced for all-day use
-
Refer to the RedMax owner's manual and official RedMax warranty documentation for full coverage terms, conditions, exclusions, and claim procedures applicable to this model
-
TS designates torque shaft/high-torque gearbox for extreme conditions
Similar to BCZ230S but enhanced torque; solid steel shaft vs. flexible
Entry pro brushcutter; pairs well with TRZ230S in lighter duty