RedMax EBZ5150 — Product Specification
-
Model: EBZ5150
Type: Backpack Gas-Powered Blower (Professional/Commercial)
Intended use: Heavy-duty debris clearing for landscaping, grounds maintenance, municipal and commercial applications
-
Engine type: 2-stroke, single-cylinder
Displacement: 51.7 cc
Power output: Approximately 2.5–3.0 HP (manufacturer-rated power depends on testing standards)
Fuel system: Diaphragm carburetor
Fuel mixture: Gasoline/oil premix (manufacturer-recommended oil ratio typically 50:1 for synthetic 2-cycle oil; verify owner's manual)
Starting system: Recoil (manual) starter
-
Airflow: Up to approximately 750–820 CFM (cubic feet per minute) depending on nozzle and RPM
Airspeed: Up to approximately 170–200 MPH (miles per hour) depending on nozzle selection and operating conditions
Throttle control: Variable throttle with cruise control/lock (depending on model variant)
-
Mount: Backpack with padded harness and adjustable straps for operator comfort
Frame: Durable tubular steel frame with anti-vibration mounts
Weight (dry, without fuel): Approximately 20–24 lb (varies with configuration and accessories)
Fuel tank capacity: Approximately 1.0–1.3 US gallons (3.8–4.9 L)
Sound level: Operator ear (dB(A)): ~90–100 dB(A) (varies by measurement method)
Vibration: Engine isolated via anti-vibration mounts; specifics depend on measurement protocol
-
Throttle: Hand throttle with variable control; may include cruise control/latch for sustained throttle
Nozzle types: Straight round nozzle and extended/wide nozzle options (varies by package)
Blower tube: Detachable two-piece or three-piece tube for storage and maintenance
Airflow control: Tube-mounted deflectors and wide-angle nozzles available as accessories
Maintenance access: Tool-accessible air filter, fuel filter, and spark plug for routine maintenance
-
Nozzles: Round nozzle, flat/nozzle options
Shoulder harness/padded straps (integrated)
Spark plug wrench, basic tool kit
Replacement air filters, fuel filters, muffler guards
Extended wand/nozzle kits, vacuum conversion kits (model-dependent)
Noise-reducing mufflers and silencers (optional)
-
EPA and CARB compliance: Meets or exceeds current emissions requirements for 2-stroke commercial handheld engines where applicable (verify current certifications and regional compliance)
Safety features: Throttle shut-off, stop switch, heat shields on muffler, spark arrester (model/region dependent)
Recommended PPE: Hearing protection, eye protection, respiratory protection as needed, long pants and gloves
-
Air filter: Inspect clean/replace every 25 hours or as needed under dusty conditions
Spark plug: Inspect/replace every 100 hours or annually
Fuel filter: Replace every 100 hours or annually
Carburetor: Periodic cleaning and adjustment; professional service as needed
General: Regular inspection of mounting hardware, tube seals, and throttle linkage
-
Overall length (with tube): 35–48 inches depending on tube configuration
Backpack frame dimensions: Compact design optimized for operator mobility
Center of gravity: Engine-mounted low and close to operator back for improved comfort
-
Refer to the RedMax owner's manual and official RedMax warranty documentation for full coverage terms, conditions, exclusions, and claim procedures applicable to this model
-
Specifications can vary by production year, regional model, and optional packages. Confirm exact specifications with the dealer or the product’s owner’s manual before purchase or service.
For professional use, consider heavy-duty maintenance schedules and OEM parts for longevity and warranty compliance.